bunker hill wireless security camera install

They were called names like Prairie Flower, Buzzard Roost, and Good Intent. I know this was long and can be confusing, but I hope it helps someone.For a hundred years, white frame or native stone one-room schoolhouses dotted the section corners across Kansas. You should now be able to view your cameras on your computer and app. You should be able to get into your software and type in the static address, the media port you selected, mine is 9000 from the example, and your password. Enter the name you want to use, enter the IP address you just wore down from the default username is admin, I used the same password that I did for my software. Go to write down your IP address, that's the IP address you will need to put in the app. The one that is recommended is called Asee download the app from your app store. Once you can pull it up, you're ready to set up your WiFi app. If they are, you need to go to your search bar and type in the static IP you chose and then :8080 exaple: 192.168.2.4:8080 that should pull up your software sign in page, if it doesn't pull it up, try going to your internet tools, internet options, security, trusted sites, enter your static IP and add and close, then try your search bar again. Once you have opened the ports on your router, go to and enter all three ports to make sure they're open. You'll need to open all three ports you just entered. You'll have to google this part cuz all routers are different. You'll have to have a separate router of your own, a modem/router combo from your internet service provider will not work properly, trust me I've tried multiple providers. Now you have to go into your router and set up port forwarding. Then go to devices, mobile, enter the username and password that you set up, then select a server port, write it down, then enter it, apply, exit. Main menu, network, static, type in the static IP, the example was 192.168.2.4, select a media port number, I selected 9000, write it down and then enter it, select a web port, I selected 8080, 80 will not work, write it down and then enter it, enter the subnet mask, default gateway, and DNS, the DNS is the the same as the default gateway, then apply, then exit. Now you have to assign a static IP to your DVR, I just change the last number of the router IP, it's just easier for me, so it would be 192.168.2.4, write it down.

Here's where it gets a little tricky, but you can do it. Write down the IP address, subnet mask, default gateway. You have to find your routers IP address, to do this, goto your start menu on your computer, type cmd, when the screen opens then type, ipconfig, then enter.

If you are able to do that, then this will help you connect, I will explain it the best I can as it took a lot of trial and error.

If you have the DVR make sure it's connected to the software download that comes with it, mine came with one called netviewer.

Bunker hill wireless security camera install